Restore™

Features + Benefits
Renews tile & grout
Cleans away hard water deposits, grout haze, efflorescence & soap scum
Professional strength, acidic formula

Where to Use
Ceramic tile, porcelain tile & grout. Masonry & concrete.

Directions
Note: Directions may vary depending on size. Always test in a small inconspicuous area to determine ease of use and desired results. Make sure all surfaces to be cleaned are swept or vacuumed to remove loose debris. Heavy duty mixture may darken some surfaces. This acid-based cleaner will etch most marble, limestone and travertine surfaces. Will etch or corrode most metal surfaces.

1. Mask off and protect any metals, baseboards or adjacent areas to avoid splashing, dripping, and overspray onto surfaces not intended to be cleaned.
2. Spray directly onto soiled areas.
3. Agitate with a scrub brush as needed.
4. Remove using a clean wet towel or sponge.
5. Rinse area well with clean water and wipe dry. Thoroughly rinse all metal surfaces with clean water.
6. Clean and rinse towel/brush with water.
7. Reseal cleaned area.

Available Sizes (and Coverage)
24 oz. Spray
Quart Concentrate: 500-2,500 sq. ft.
Gallon Concentrate: 2,000-8,000 sq. ft.

Related Products
To protect your stone’s natural beauty, seal your stone with BulletProof™ Sealer or Heavy Duty Sealer.